dimensions are shown in mm speci?ations and dimensions subject to change www .ck-components.com contacts copper alloy plating contact area : gold alloy inlay or gold over nickel terminals : tin lead (2 min) moldings high temp. thermoplastic ul 94v-0 rated slide lock/metal cover stainless steel number of contacts 6 or 8 mechanical life, hinged cover 10,000 cycles min mechanical life, ? xed cover 50,000 cycles card insertion force hinged cover: 1 n max fixed cover: 3 n max car d extraction for ce hinged cover: 1 n max fixed cover: 0.80 n min / 3 n max contact force 0.25 n min / 0.50 n max slide locking force 2 n min / 6 n max vibration frequency 10 to 500 hz. acceleration 50m/s 2 duration 6 hours - amplitude 0,35 mm max electrical discontinuity 1? shock peak value 500 m/s 2 Cduration 11 ms 3 shocks in each direction of each axis max electrical discontinuity 1 s insulation resistance 1,000 m min resistance 100 m max curr ent rating 10 a min / 1 a max dielectric strength 750 vrms min card detection switch normally open contact r esistance 100 m max dielectric str ength 250 vrms min current rating 1 ma min / 10m a max maximum power 0.2 va operating temperature -40c to +85c soldering temperature temperature/time pro?le acc. to cecc00802 para . 6.1, fig. 3 with peak temperature 250c damp heat iec 512 test number 11c (10 days) salt mist iec 512 test number 11f (96 hours) quantity per r eel, see table next page. 15 ccm03 mk ii a new range of ccm03 connectors have been developed to interface with sim/sam cards as de?ned by gsm11- 11 and env1375-1. the connectors are available with either hinged covers or ?ed covers and have been designed tominimize the amount of space needed for pcb mounting. features hinged cover ?available with 6 or 8 contacts, with or without pcb locating pegs. ?a vailable with insulated card presence switch. ?the cover springs open when unlocked while the card is in place. ?the molding is polarized so that the cover can only be closed if the card is correctly inserted. ?the cover can be replaced without removing the connector from the pcb. ?inspection slots allow an electrical test to be made without opening the cover . ?the overall height of the connector is only 2,5 mm. the amount of spaceneeded to mount the connector is just 29,65 mm x 17,2 mm. fixed cover ?a vailable with 6 or 8 contacts. ?the overall height of the connector is 2,85 mm max. only 25,5 mm x 17,2 mm of board space is required to mount the connector . general ?with tape and reel packaging as stan- dard, the connectors are designed to be automatically pick-and-placed. ?the high temperatur e thermoplastic moldings are suited for infrared and convection soldering processes. ?by using an inlay nish in the contact area the life of the precious metal is extended by over 10 times that of standard gold plating. ?robustly formed printed circuit tails allow a co-planarity of 0,05 mm to be maintained. construction mechanical data contact electrical data switch electrical data environmental data packaging
dimensions are shown in mm speci?ations and dimensions subject to change www .ck-components.com dimensional drawings 1,25 1,25 (2,7 max. includes solder tails) 2,5 11,35 17,2 3,81 3,8 3,5 2,45 1,25 5,65 0,2 13,8 29,65 0,1 0 -0,1 0,7 25? 0,8 (ref.) 25,5 0,65 r 1,9 3,81 3,81 25,4 0,2 0,4 180?ax (ref.) 25,5 25 28,4 microsim car d xx-xxx see detail a date code area mated condition r 1,9 pick and plac e area ?3,5 slider lock ed bump detail a pcb layout unless otherwise stated, tolerances are 0,10 mm hinged cover ccm03 - 3001 (6 contacts) 3002 (6 contacts - pcb locating pegs) 3003 (8 contacts) 3004 (8 contacts - pcb locating pegs) ccm03-3001 / 3002 ccm03-3003 / 3004 notes: coplanarity of soldering surfaces: 0,05 mm *pegs: height 0,7 mm and ? 1 mm 16 ccm03 mk ii part number number of cover pcb locating quantity contact switch card presence contacts pegs per reel finish lock switch ccm03-3001 r102 6 hinged no 1000 inlay no no ccm03-3002 r102 6 hinged yes 1000 inlay no no ccm03-3003 r102 8 hinged no 1000 inlay no no ccm03-3004 r102 8 hinged yes 1000 inlay no no ccm03-3009 r102 6 hinged no 1000 gold no no ccm03-3010 r102 6 hinged yes 1000 gold no no ccm03-3011 r102 8 hinged no 1000 gold no no ccm03-3012 r102 8 hinged yes 1000 gold no no ccm03-3013 r102 6 hinged no 1000 gold no yes (insulated) ccm03-3514 r102 6 hinged no 1000 inlay yes no ordering code ccm03-3504 r122 8 fixed no 1200 inlay no no ccm03-3505 r122 6 fixed no 1200 inlay no no 25,5 2,5 5,5 5,5 3,81 3,81 1,8 1,27 8,6 23,2 1,5 1,5 9,34 6,35 20,32 10,16 5,08 ? 1,2 +0,1 0 ?0,1 1,44 2x 2,54 1,3 0,2 current location according to env1375-1 & gsm11-11 contact foot area 0,8 x 1 (component side) 6x c5 plastic outline pad prohibited area c6 c7 c1 c2 c3 2x 25,5 2,5 5,5 5,5 3,81 3,81 1,8 1,27 8,6 23,2 1,5 1,5 9,34 1,55 3x 2,54 1,3 0,2 contact location according to env1375-1 & gsm11-11 c5 0,8 x 1 (comp onent side) prohibited area c6 c7 c1 c2 c3 c8 c4 8x plast ic out line pad
17 dimensional drawings pcb layout unless otherwise stated, tolerances are 0,10 mm hinged cover ccm03 - 3013 (6 contacts + card presence switch) ccm03 - 3013 (6 contacts + car d pr esence switch) note: coplanarity of soldering surfaces: 0,05 mm ccm03 mk ii hinged cover insulated card presence switch 25,5 2,5 5,5 5,5 3,81 3,81 1,8 1,27 8,6 23,2 1,5 1,5 9,34 1,55 3x 2,54 1,3 0,2 contact location according to env1375-1 & gsm11-11 c5 contact foot area 0,8 x 1 (component side) prohibited area c6 c7 c1 c2 c3 sw sw 8x plastic outline pad 1,25 1,25 (2,7 max. includes solder tails) 2,5 11 ,35 17,2 3,81 3,8 3,5 2,45 1,25 5,65 0,2 13,8 29,65 0,7 25? 13,15 2,1 9,6 3,7 0,65 r 1,9 1 0,3 a 0,1 0 -0,1 0,8 25,5 0,2 0,4 (ref.) 25,5 3x 2,54 8,6 1,27 3,81 3,81 25,4 0,2 0,4 180?ax 25 28,4 15 (ref.) 25,5 microsim card xx-xxx see detail a date code area mated condition 8x detail insulated blade switch r 1,9 pick and place area ? 3,5 slider locked detail a plastic actuator a dimensions are shown in mm speci?ations and dimensions subject to change www .ck-components.com
18 dimensions are shown in mm speci?ations and dimensions subject to change www .ck-components.com dimensional drawings 11,35 17,2 3,81 3,8 0,7 1,25 1,25 2,45 3,5 5,65 0,2 13,8 29,65 25? 2x 2,54 13,15 0,4 25,5 0,2 1,25 r 1,9 9,6 3,7 2,1 0,65 0,8 (ref.) 25,5 0,6 0,3 a 8,6 1,27 5,08 5,08 (3,2 max includes solder tails) 3 0,5 +0,1 0 0,45 0,1 0 3,81 3,81 0,4 25,4 0,2 180 ?ax 28,4 15 (ref.) 25,5 25 microsim car d bump xx-xxx see detail a date code area mated condition 8x on contacts & left lock s witch terminal on right loc k switch ter minal only r 1,9 pick and plac e area ?3,5 slider lock ed left lock s witch terminal right lock s witch terminal detail a a pcb layout 3,81 3,81 2,5 5,5 5,5 25,5 3 3,4 5,6 7,6 2,4 1,8 1,4 5,08 5,08 1 0,2 23,2 1,5 1,5 1,55 9,34 2x 2,54 8,6 1,27 c5 contact foot area 0,8 x 0,6 (component side) c6 c7 c1 c2 c3 8x contact location according to env1375-1 & gsm11-11 plastic outline pad prohibited area unless otherwise stated, tolerances ar e 0,10 mm hinged cover ccm03 - 3514 (6 contacts - with switch on metal lock) ccm03 - 3514 (6 contacts - with switch on metal lock) note: coplanarity of soldering surfaces: 0,05 mm ccm03 mk ii hinged cover
19 dimensions are shown in mm speci?ations and dimensions subject to change www .ck-components.com dimensional drawings a a b b (ref.) 3,45 21,55 ? 1,4 +0,05 0 0,15 min 2,45 ? 1,6 1,4 +0,05 0 0,8 30? 0,8 1,25 0,05 0,2 2,65 12,1 15,2 +0,1 0 17,2 0,05 1,9 2,3 40? (ref.) 25,5 0,75 25,5 0,2 12,7 2,5 3x 2,54 1 0,3 a 10,16 3,81 3,81 0,3 0,02 0,4 2,54 0,1 0 -0,1 8,6 1,27 12,75 25,5 (ref.) 25,5 (ref.) 17,2 (ref.) 9,75 12,9 0,4 2,85 (3 max includes solder ta ils) date code area card stop mated condition xx-xxx pick and plac e area ? 3,5 see detail a 8x detail a a pcb layout unless otherwise stated, tolerances are 0,10 mm fixed cover ccm03 - 3504 (8 contacts) ccm03 - 3505 ccm03 - 3504 note: coplanarity of soldering surfaces: 0,05 mm ccm03 mk ii fixed cover 2,5 5,5 5,5 1,8 25,5 3,81 3,81 ? 2x 1,4 +0,05 0 8,6 6,35 2,54 1,5 23,2 1,5 1,44 3x 2,54 1,27 12,7 1,3 0,2 contact location according to env1375-1 & gsm11-11 c1 c5 contact foot area 0,8 x 1 c2 c3 c4 c6 c7 c8 8x (comp onent side) plastic outline pad prohibited area 2,5 5,5 5,5 1,8 3,81 3,81 25,5 ? 2x 1,4 +0,05 0 8,6 6,35 2,54 1,5 23,2 1,5 1,44 2x 2,54 1,27 1,3 0,2 12,7 env13 75-1 & gsm11-11 c1 c5 contact foot area 0,8 x 1 c2 c3 c6 c7 6x (comp onent side) plastic outline pad prohibited area
|
